December CreativeMe68-Monthly Cards and Scrapbooking Kits - Countryside Inn DSP and Heartfelt Hexagon Bundle

 

 

Hello everyone, Shaz (aka CreativeMe68) here from StudioShabaz.
I am the owner and creator at Sharon Dalton Independent Stampin' Up! Demonstrator
from Gogango, Central Queensland.

Today I had FUN showcasing the Countryside Inn DSP along with Heartfelt Hexagon Bundle in my group CreativeMe68 - Monthly Card and Scrapbooking Kits group.

On the 1st Sunday of the month I will be going LIVE at 1pm to showcase my monthly
Card & Scrapbooking Kits which you will receive FREE (minimum purchases required)
Today I had a few technical issues, BUT I overcome the problems and forged 
ahead with my LIVE.  Thank you to those of you who joined me LIVE.
If you can't find the video on the group you can also watch it on YouTube


3 Cards and 2 Scrapbooking Layouts


Card 1 - You're A Friend Like No Other
Dimensions
Misty Moonlight Card Base - 5 7/8" x 8 1/4" scored at 4 1/8"
Countryside Inn DSP Card Front Panels - 3 7/8" x 3"
Countryside Inn DSP Card Front Panel (Top & Bottom) (2) - 3 7/8' x 1"
Basic White Cardstock 3" x 2 1/4" used with Heartfelt Hexagon Punch
Stamped with sentiment of choice.
Night of Navy Cardstock 3' x 2 1/4" used with Heartfelt Hexagon Punch
Cut in half lengthways.
12" Boho Blue Textured Ribbon
 Countryside Inn DSP Card Inside Panel - 3 7/8" x 3"
Boho Blue Cardstock Insert - 3 7/8" x 3"
Embellishments -Tinsel Gems Three Pack
Misty Moonlight Stampin' Pad
Night of Navy Stampin' Pad
Adhesives of choice - Tombow Multipurpose Glue, Stampin' Dimensionals
Non Stampin' Up! DS Tape

Instructions
1. Fold and Burnish Card, then open front of the card
into a landscape orientation onto your trimmer. 
2. Place the LHS of your card at the 1 1/4" position and cut
up until you reach your score line.
3. Move your card along until you get to the 1 1/4" on outside
cutting position of your trimmer and cut up until you reach the score line.
You will not need your trimmer again.
4. Those (2) outer 1 1/4" cut lines you will now adhere to your card base with glue of choice.
5. With the Card Front panel glue DSP of choice to the front.
6. Add adhesive of choice to adhere down the Boho Blue Textured ribbon loops.
7. Stamp Border and sentiment (your choice) on the Basic White Cardstock
with Night of Navy Classic Stampin' Pad using the Heartfelt Hexagon to
punch out your sentiment.
8.You could add Floral elements from Heartfelt Hexagon Stamp set
with Misty Moonlight Stampin' Pad
9. Punch Heartfelt Hexagon from Night of Navy Cardstock, cut in half lengthways
to layer behind the Basic White Hexagon sentiment.
Layer up with Stampin' Dimensionals.
10. Adhere to the layered ribbon on the front DSP panel.
11. Open and add the DSP panel to inside of card.
12. Stamp sentiment (your choice) with Night of Navy Stampin' Pad to
Boho Blue Cardstock Insert and adhere to inside of card.
13. Add some bling from the Tinsel Gems Three-Pack.

Card 2 - For You
Dimensions

Boho Blue Card Base - 5 7/8" x 8 1/4" scored at 4 1/8"
 Countryside Inn DSP Card Front Panel - 5 5/8" x 3 7/8"
Night of Navy Cardstock Banner - 4 3/4" x 2 1/4"
Countryside Inn DSP Banner - 4 1/2" x 2 1/4"
Basic White Cardstock 3" x 2 1/4" used with Heartfelt Hexagon Punch
Basic White Cardstock Insert - 5 5/8" x 3 7/8"
Embellishments -Tinsel Gems Three Pack
Boho Blue Stampin' Pad
Night of Navy Stampin' Pad
Adhesives of choice - Tombow Multipurpose Glue, Stampin' Dimensionals
Non Stampin' Up! DS Tape

Instructions
1. Fold and Burnish Card
2. Adhere the DSP to the front of card with adhesive of choice.
3. Night of Navy Cardstock is inserted into Heartfelt Hexagon Punch to create your banner.
Insert the 2 1/4" piece of cardstock into the front of the punch and pull out
through the middle of the punch to be able to create your banner. Then punch
4. Again do the same with the DSP banner BUT cut about an 1/8" off both long sides to fit inside the Night of Navy Banner. You may also have to trim some from the top to have the same border all the way around the banner.
(See photo for reference)
5. Stamp Border and sentiment (your choice) from Heartfelt Hexagon bundle
on the Basic White Cardstock with Night of Navy Classic Stampin' Pad.
6. Floral elements from Lasting Joy Stamp set with Boho Blue Stampin' Pad,
Now using the Heartfelt Hexagon to punch out your sentiment.
7. Fussy cut off the dotted border to make the banner smaller to fit on the banner
and adhere with adhesive of choice.
8. Stamp sentiment if you wish on the Basic White Cardstock Insert and adhere to the inside.
9. Add some bling from the Tinsel Gems Three-Pack.

 

Card 3 - Embossed Hexagon - For You
Dimensions
Night of Navy Card Base - 5 7/8" x 8 1/4" scored at 4 1/8"
Basic White Cardstock - 5 3/4" x 4"
 Countryside Inn DSP multiple designs (7 or 8) at least - 3" x 2 1/4" 
used with Heartfelt Hexagon Punch
 Countryside Inn DSP Card Front Panel - 5 5/8" x 3 7/8"
12" Night of Navy Bordered Ribbon
Night of Navy Cardstock - 3" x 2 1/4" used with Heartfelt Hexagon Punch
Boho Blue Cardstock - 3" x 2 1/4" used with Heartfelt Hexagon Punch
Embellishments -Tinsel Gems Three Pack
Misty Moonlight Stampin' Pad
Night of Navy Stampin' Pad
Adhesives of choice - Tombow Multipurpose Glue, Stampin' Dimensionals
Non Stampin' Up! DS Tape


Instructions
1. Fold and Burnish Card.
2. Adhere the Basic White Cardstock to the front of card with adhesive of choice.
3. Punch out at least 7 or 8 Heartfelt Hexagon shapes from your DSP designs.
4. Adhere the DSP Hexagon shapes to the Card front DSP panel all over the
background then trim off the excess.
5. Adhere the DSP Card Front panel to the Basic White Cardstock with adhesive of choice.
6. Add adhesive of choice to adhere down the Night of Navy Bordered ribbon loops.
7. Stamp Border and sentiment (your choice) on the Boho Blue Cardstock
with Misty Moonlight Classic Stampin' Pad using the Heartfelt Hexagon to
punch out your sentiment.
8. Punch Heartfelt Hexagon from Night of Navy Cardstock, cut in half lengthways
to layer behind the Boho Blue Hexagon sentiment.
Layer up with Stampin' Dimensionals.
9. Add some bling from the Tinsel Gems Three-Pack.
10. Stamp Border and sentiment (your choice) with Night of Navy Stampin' Pad to
Basic White Cardstock insert and adhere to inside of card.
 

Scrapbooking Layout - Let's Eat Cake - HB2U
Dimensions
White Cardstock - 12" x 12"
Countryside Inn DSP multiple designs (4) at least - 3" x 2 1/4" 
used with Heartfelt Hexagon Punch
Night of Navy, Misty Moonlight and Boho Blue Cardstock - 3" x 2 1/4" 
used with Heartfelt Hexagon Punch/Countryside Blossoms EF
Night of Navy - 4 3/8" x 4 1/4"
Basic White Cardstock - 4 1/4" x 4 1/8"
Countryside Inn DSP (Boho Blue with Misty Moonlight dot Stripe) - 7 7/8" x 2 3/8"
Countryside Inn DSP (Night of Navy & Misty Moonlight Stripe) - 9" x 1/2"
Countryside Inn DSP (Boho Blue with Boho Blue Floral) - 9" x 3/4"
Night of Navy Cardstock Banner - 4 3/4" x 2 1/4"
Countryside Inn DSP (Boho Blue with Boho Blue Floral) Banner - 4 1/2" x 2 1/4"
Diecut with Apple Blossoms Scalloped Die
Night of Navy Cardstock with Adhesive Sheet adhered to the back - 2 1/2" x 2"
Embellishments -Tinsel Gems Three Pack
Boho Blue Stampin' Pad
Night of Navy Stampin' Pad
Adhesives of choice - Tombow Multipurpose Glue, Stampin' Dimensionals
Non Stampin' Up! DS Tape




Instructions

1. Punch out multiple Countryside Inn DSP designs with the Heartfelt Hexagon punch
at least 4 of each design.
2. Punch out multiple
Night of Navy, Misty Moonlight and Boho Blue Cardstock with
the Heartfelt Hexagon punch at least 3 of each design.
3. Using the Countryside Blossoms Embossing Folder and the Stampin' Cut & Emboss machine run them through to add the design from the folder onto the cardstock.
Using Plate 1, Plate 3, Embossing Folder with cardstock inside and Plate 3.
4.  Mark yourself with very feint pencil lines some cross reference points so that you can start adding your elements of the design for the layout.
I do this to make sure my layout is straight.

5. I start out by adding the largest elements of the layout which is the rectangle of
Countryside Inn DSP (Boho Blue with Misty Moonlight dot Stripe)
towards the middle about 4" from the bottom. 
I use tape for these larger pieces. Adding a piece of tape to the middle and top and bottom
BUT only pulling off the middle strip of tape so that I can pop things underneath.
Then once I am happy with my placement of the other elements I go back and remove the
tape from top and bottom.
6. Adhere Countryside Inn DSP (Night of Navy & Misty Moonlight Stripe)
over the other piece of Countryside Inn DSP so that it overlaps it on the RHS
of the design.
7. Using the Apple Blossoms Dies create a scalloped border on the
Countryside Inn DSP (Boho Blue with Boho Blue Floral) with the Stampin' Cut & Emboss
Machine using Using Plate 1, Plate 2, Plate 3, Scalloped Die and DSP then Plate 3.
Adhere the scalloped edge to the Countryside Inn DSP (Night of Navy & Misty Moonlight Stripe) so that it overlaps the other layers.
8. Start by placing your DSP hexagons on your layout then come in with the
Embossed Cardstock hexagons to form a pattern on the 12" x 12" Basic White Cardstock.
Once you are happy stick them in place.  Then tear off the double sided tape from behind the larger middle panel.
9. To create the banner -  Night of Navy Cardstock is inserted into Heartfelt Hexagon Punch.
Insert the 2 1/4" piece of cardstock into the front of the punch and pull out
through the middle of the punch to be able to create your banner. Then punch
10. Again do the same with the DSP banner. You may also have to trim some from the top to have the same border all the way around the banner.
(See photo for reference)
11. Stamp Border and sentiment (your choice) from Heartfelt Hexagon bundle
on the Basic White Cardstock with Night of Navy Classic Stampin' Pad.
12. Adhere Night of Navy Photo Mat to the middle RHS of the Hexagon background.
13. Adhere Basic White Photo Mat over the Night of Navy Photo Mat.
14. With the Night of Navy Cardstock  adhere the Adhesive sheet to the back and then
Diecut out the letters that you want for the title, as they are already sticky you can
put them right in place without having to fuss with messy glue. 
I used HB2U as I was not really sure which photos I was going to use.
15. Add some bling from the Tinsel Gems Three-Pack.

Scrapbooking Layout - Shae's - 18
Dimensions 

Countryside Inn DSP multiple designs (4) at least - 3" x 2 1/4" 
used with Heartfelt Hexagon Punch
Night of Navy, Misty Moonlight and Boho Blue Cardstock - 3" x 2 1/4" 
used with Heartfelt Hexagon Punch/Countryside Blossoms EF
Night of Navy Cardstock - 5 1/2" x 4 1/8"
Night of Navy Cardstock - (2) x 4" x 3"
Basic White Cardstock - 5 1/4" x 3 7/8"
Basic White Cardstock - (2) x 3 3/4" x 2 3/4"
Countryside Inn DSP (Boho Blue with Misty Moonlight dot Stripe) - 8 3/4" x 4"
Night of Navy Cardstock with Adhesive Sheet adhered to the back - 5 1/2" x 2"
Adhesives of choice - Tombow Multipurpose Glue, Stampin' Dimensionals
Non Stampin' Up! DS Tape


Instructions

1. Punch out multiple Countryside Inn DSP designs with the Heartfelt Hexagon punch
at least 4 of each design.
2. Punch out multiple Night of Navy, Misty Moonlight and Boho Blue Cardstock with
the Heartfelt Hexagon punch at least 3 of each design.
3. Using the Countryside Blossoms Embossing Folder and the Stampin' Cut & Emboss machine run them through to add the design from the folder onto the cardstock.
Using Plate 1, Plate 3, Embossing Folder with cardstock inside and Plate 3.
4.  Mark yourself with very feint pencil lines some cross reference points so that you can start adding your elements of the design for the layout.
I do this to make sure my layout is straight.
5. I start out by adding the largest elements of the layout which is the rectangle of
Countryside Inn DSP (Boho Blue with Misty Moonlight dot Stripe)
towards the middle about 4" from the bottom BUT closer to the right side of the page.
I use tape for these larger pieces. Adding a piece of tape to the middle and top and bottom
BUT only pulling off the middle strip of tape so that I can pop things underneath.
Then once I am happy with my placement of the other elements I go back and remove the
tape from top and bottom. 
6. Next I worked out where the photos using the largest photo mats in Night of Navy,
and marked their spots so that I had an idea of where I was placing the hexagon's
on my layout.
Again I placed these under my Countryside Inn DSP (Boho Blue with Misty Moonlight dot Stripe) along the top and bottom of this DSP and then took off the cover of the double sided tape from behind the larger middle panel to secure completely.
7. Continuing to build my design with the hexagons to finish off my page.
8.

 

Thanks again for following along, if for some reason you cannot
understand what I have done in the video please leave me a comment
OR send me a private message..