Welcome to World Card Making Group, 12 Days of Christmas.
The Creative Team have been creating AMAZING Christmas Projects
to inspire you this Christmas which is just around the corner.
I am Sharon Dalton an Independent Stampin' Up! Demonstrator
in Gogango, Central Queensland 4702.
My Studio Shabaz is a bit of disarray from all the creating I have been doing.
Today I am up with Day 5 of 12 Days of Christmas projects.
I have created 3 Cards in a Kraft Gift Box with Tag for family or friends.
3 Cards In a Kraft Gift Box
All my cards (3) use the same DSP
from Whimsy & Wonder DSP (pg 24 & 25) for each card.
I will add the measurements and instructions on the same line for each card.
All layers are attached with adhesive of choice.
CARD 1 – Picture This Die
1.
Standard Card Base –
Misty Moonlight 8 ¼” x 5 7/8” scored at 4 1/8”
OR 10.5cm X 14.8cm
2.
Whimsy & Wonder DSP -
Silver Foil Diagonal 4 1/6” x 5 ¾” OR 10.2cm
x 14.5cm
Layer on top of your Card Base with adhesive of choice
3.
Whimsy & Wonder DSP –
Blue Tree 3 15/16” x 5 5/8” OR 9.9cm
X 14.3cm
Layer on top of Silver Foil Diagonal DSP with adhesive of choice
4.
Basic White Cardstock –
Picture This Dies (pg 164 AC) 3 ¾” x 5 7/16” OR 9.5cm x 13.8cm
Run through the Stampin’ Cut & Emboss Machine. HINT
Turn die slightly so it isn’t running through the roller straight on.
Centre and Layer on top of Blue Tree DSP with adhesive of choice
5.
Whimsy & Wonder – Pink,
3 ¾” x 1 ½” OR 9.5cm X 3.2cm
Hand cut banner or use Tailored Tag Punch to
flag ends, add Stampin' Dimensionals
Layer to the left over the Basic White Picture This Die with adhesive of choice .
6.
Basic White Cardstock –
Scrap
Stamp Tree in Misty Moonlight Ink for Tree Branches
and Polished Pink Ink for decorations on
the tree.
Then Die cut Tree with Christmas Tree Dies
through the Mini
Stampin’ Cut & Emboss Machine.
Adhere to the Pink banner on the left side to allow room for Sentiment.
7.
Silver Foil Specialty
Pack (pg 23 Mini) – Silver Foil 2" x 6" OR 5cmx15.5cm
Die cut
Garland with Christmas Tree Dies (pg 25 Mini)
through the Mini Stampin’ Cut
& Emboss Machine.
Using adhesive of choice layer Garland on top of Die cut Tree.
8.
2021-2023 In Color Jewels
– Add 3 Polished Pink jewels to the card
9. Basic White Cardstock – Insert 3 15/16” x 5 5/8”
OR 10cm x 14.3cm,
Stamp Sentiment
and Baubles with Misty Moonlight Ink.
Attach to the inside with preferred adhesive
CARD 2 – Embossed
– Merry Melody 3D
1.
Standard Card Base –
Misty Moonlight 8 ¼” x 5 7/8” scored at 4 1/8” OR 10.5cm X 14.8cm
2.
Basic White Cardstock –
Merry Melody 3D Embossing Folder(pg 42 Mini)
5 5/8” x 3 15/16” OR 14.2cm x 10cm
Run through the Stampin’ Cut & Emboss Machine.
Layer on top of your Card Base with adhesive of choice
3.
Whimsy & Wonder –
Pink DSP, 5 5/8” x 1 3/8” OR 14.2cm x 3.2cm
Layer on top of Merry Melody 3D Embossed card with adhesive of choice
4.
Whimsy & Wonder – Blue
Trees 3” x 3”
Die cut Painted Label Circle (pg 164 AC)
run through the Mini
Stampin’ Cut & Emboss Machine.
Layer Die cut Circle, towards the centre BUT more to the left
over top of Pink DSP with adhesive of choice
5.
Basic White Cardstock –
Scrap
Stamp Tree in Misty Moonlight Ink for Tree Branches.
Then Die cut
Tree with Christmas Tree Dies through the
Mini Stampin’ Cut & Emboss
Machine.
Attach Stampin’ Dimensionals on the back of the Tree.
Layer Tree over the Blue Trees Circle to the right of it with adhesive of choice.
6.
Silver Foil Specialty
Pack (pg 23 Mini) – Silver Foil 2" x 6" OR 5cmx15.5cm
Die cut Garland with Christmas Tree Dies (pg 25
Mini)
Run through the Mini Stampin’ Cut & Emboss Machine.
Then stick on top of Die cut Tree with
preferred adhesive.
7.
Basic White Cardstock – Scrap
Stamp Sentiment with Polished Pink Ink,
cut slant on your sentiment.
Attach with Stampin’ Dimensionals.
Layer over the Blue Trees Circle on the left of the Die cut Tree.
8.
2021-2023 In Color Jewels
– Add 3 Polished Pink jewels to the card
9.
Silver Foil Specialty
Pack (pg 23 Mini) – Silver Foil Scrap
Die cut Mini Stars with Christmas Tree Dies (pg
25 Mini)
Run through the Mini Stampin’ Cut & Emboss Machine.
Then stick on top of Tree with preferred
adhesive.
10.
Basic White Cardstock –
Insert 3 15/16” x 5 5/8” OR 10cm x
14.3cm.
Stamp Sentiment with Polished Pink Ink
Then Stamp Small Tree with Polished Pink Ink.
1 Tree in the middle on the right then 2 Trees either side
stamped off.
Attach to the inside with
preferred adhesive
CARD 3 – SlidingEasel Card (INSPIRED BY JULIE DAVISON)
DISCLAIMER - FOLLOW ALONG WITH JULIE’S
VIDEO
YOU WON’T MAKE THE MISTAKES I MADE.
1. Tent Fold Card Base – Basic
White Thick Cardstock
11” x 4 1/4”
scored at 5 ½”
OR 28cm x 10.8cm
Open card up laying flat on your Trimmer,
Cut two lines 1” from each long side
from
1” down to 4 ½”. Cut between the lines
at 4 ½”.
2.
Score between the lines
at 1” and 2 ¾” from the top,
(which I said 1 ¾” from the cut line in video).
(I forgot to do 1” score line on the
video)
SORRY I did it later a couple
of step later.
3.
Add two strips of Tear n
Tape to the right side and the left side of the our base card,
DO NOT PULL OF TAPE YET!
4.
Basic White Cardstock – Insert
3 ¼” x 4” OR 8.2cm x 10.2cm
Stamp the Baubles in Polished Pink Ink at the top of the slider on the right
side
Stamp the sentiment in Misty Moonlight Ink
on the left side almost level with
the 1st Bauble
Punch a small hole in the middle of your insert,
just eyeball where the centre
is on the grid paper or measure like I did.
5.
Bring our Tent Fold Card
Base back in, where we will stamp the
hidden Sentiment under the flap that becomes part of our slider.
Pop up your slider (This is
where in the video 28.27 min mark
that
I did the second score line from instruction two)
Stamp with Polished Pink the Sentiment,
trying to make sure that you centre it
when stamping.
6.
On cut out piece from
the middle of
Tent Fold Card Base to add a hinge.
In the video
I said we needed a Basic White scrap 2 ½” x 1”
BUT I corrected myself and cut the
piece down to 2” x 1”
folding in half to form our hinge.
Stick the folded flap close to the inside edge of the slider
with Multipurpose
glue. (see video at 31.08 min mark)
7. Place
our Basic White Cardstock – Insert back into our card
so that we can stick the
slider to the insert.
You will have your 2 strips of Tear n Tape on either side
of your card.
Align the insert to be centred inside your card,
then add some Multipurpose
glue to the other side of the hinge
and stick that to the centred insert. This
creates the slider.
I realised in the video that I made my insert that little bit too long
so I
chopped off about ½” from the insert
(see video at 33.06 min mark)
I adjusted the measurements in instruction No 4
to
reflect this mistake.
FOLLOW ALONG WITH
JULIE’S VIDEO
YOU WON’T MAKE THE MISTAKES I MADE. LOL!!!
8. Blue
Trees DSP 4 ¼” x 5 ½” OR 10.8cm x
14cm –
Cut Frame on your trimmer at the 1” mark from 1” to 4 ½” mark on both sides
then turn to the 1” mark
again and trim between the two cut lines top and bottom.
This creates the outer frame to cover your
Basic White Cardstock – Thick.
Attach to the outside with preferred adhesive.
I forgot something else, you need to use
the Label Me Fancy Punch to cut a finger pull hole in this layer to pull up the
ribbon to reveal the slider.
See my first card,Turn the punch upside down to centre it
and cut
out the little piece of shape with Label Me Fancy Punch.
Pull cover off your Tear N Tape and stick card together.
9. Basic
White Cardstock – Scrap to Stamp Tree in Misty Moonlight Ink
then Die cut Tree
with Christmas Tree Dies
through the Mini Stampin’ Cut & Emboss Machine.
Attach Stampin’ Dimensionals on the back of the Tree on the middle bottom half.
Basic
White Cardstock – Scrap to Stamp two(2) Small Tree in
Polished Pink Ink then Die cut Tree with
Christmas Tree Dies
through the Mini Stampin’ Cut & Emboss Machine.
(Video
stops at 40.03 min mark, see Video 2
of 2 to continue this card)
10. Using
Multipurpose glue stick your two(2)
Polished Pink trees to the inside of the slider
on either side.
Making sure not to put the glue up too high like I did.
Then
we add our Misty Moonlight Tree with dimensionals to the middle of that slider.
11. Cut
12” OR 31cm Polished Pink Open Weave
Ribbon
to tie your bow at the top of your slider with the hole we cut in
instructions No 4
12.
2021-2023 In Color Jewels
–
Add 3 Polished Pink jewels to the tops of the Die cut Trees
13.
Video Link on You-Tube, I had issues with my videos so there are two videos.
Video 1 of 2
https://youtu.be/vJVHftrUr5A
Video 2 of 2 https://youtu.be/dsfpuxAZ7mw
